By using Raplas REACH compliant resins, manufacturers can be assured that their products are safe for the environment and for human health, while still providing the performance and durability needed for their specific application. To learn more about REACH compliance, click the button below.
Raplas SLA Materials
Raplas Resins are REACH Compliant
Raplas RR60CR
-
RR60CR is a crystal clear, tough dimensionally stable resin for 355nm Solid State Laser Systems.
Ideal for high clarity and dimensionally challenging builds. Its low viscosity with excellent re-wetting provide fast stunning clear parts for industrial applications.
-
Colour: Crystal Clear
Viscosity: 270 cps
Ec: 11.2 mj/cm2
Dp: 6.6 mils
Density: 1.12 g/cm3
Raplas R100DC
-
R100DC is a direct casting resin for 355nm Solid State Laser Systems.
Ideal for high detail investment patterns with good surface finish capable of detailed parts. R100DC has a low melt temperature and produces a clean burning pattern with good natural strength. Cured resin is stable and resists attack from investment and shell materials before burnout.
-
Colour: Lime Green
Viscosity: 200 cps
Ec: 10.6 mj/cm2
Dp: 6.6 mils
Density: 1.12 g/cm3
Tensile Strength: ASTM D638 51MPa
Tensile Modulus: ASTM D638 2650MPa
Raplas RR60WH
-
RR60WH is a tough optically neutral white, dimensionally stable resin for 355nm Solid State Laser Systems.
Ideal for general purpose and detail critical builds. Its low viscosity with excellent re-wetting provide fast build times increasing productivity.
-
Colour: White
Viscosity: 290 cps
Ec: 10.6 mj/cm2
Dp: 6.6 mils
Density: 1.12 g/cm3
Tensile Strength: ASTM D638 54Mpa
Tensile Modulus: ASTM D638 2920Mp
Raplas RR60GR
-
RR60GR is a tough neutral pale grey resin for 355nm Solid State Laser Systems.
Ideal for general purpose and fine detail parts. Its low viscosity with excellent re-wetting provide fast build times increasing productivity.
-
Colour: Grey
Viscosity: 290 cps
Ec: 10.6 mj/cm2
Dp: 6.6 mils
Density: 1.12 g/cm3
Tensile Strength: ASTM D638 54Mpa
Tensile Modulus: ASTM D638 2920Mp
Raplasprint BIO
-
RaplasPrint Bio is a BPA-Free, tough, dimensionally stable resin for 355nm Solid State Laser Systems.
Ideal for the maunfacture of medical devices, hearing-aids, drill-guides and other applications requiring medical conformity. Other colors available upon request.
-
Colour: Clear
Viscosity: 1760 cps
Ec: 18.5 mj/cm2
Dp: 6.9 mils
Density: 1.1 g/cm3
Cured Hardness: ASTM D2240 83 Shore D
Flextural Strength: ASTM D790 84Mpa
Medical Conformity
Medical Devices – 93/42/EEC – Class IIa, R5, S2
Biological – ISO 10993 – Part 1/5/10
Bisophenol A – BPA – BPA Free
Post-processing: Pre-cleaning with isopropanol for 3 mins in an ultrasonic bath, venting canals with compressed air, main-cleaning with isopropanol for 3 mins in an ultrasonic bath, blowing off the remaining isopropanol and drying for 30 mins at approx. 40°C. Post-curing: Standard UV Post Curing Unit or Xenon Photoflash Unit.
To access the materials data sheet and specifications please fill out and submit this form - Thank you.
